Tel: 0843 317 7820
Recently added item(s)
You have no items in your shopping cart.
Item code: 27375
The Prodisc LED fitting can be as simple or as versatile as you need it to be. It is available as a standard or an emergency fitting and both fittings are also available with a Microwave Movement Sensor option.
As you would expect this is simply a LED fitting operated by a standard light switch.
This activates when movement is sensed within 10M, 360deg detection range and the time on can be adjusted between 6 seconds and 30 minutes.
Microwave sensors have the added benefit of being able to sense movement through doors allowing lighting to activate as a room or corridor is approached rather than requiring movement inside the area to do so.
Standard or Dual mode options - can be set to either turn off or 'power down' when no more motion is detected.
The Prodisc can be installed as either maintained or non-maintained, and the choice of 1 or 3 hour emergency lighting mode.
This offers the best of both worlds. The microwave sensor will detect movement and turn the light on for the pre-set time. Should the power fail the emergency lighting will take over for pre-set time.
Both the standard and microwave sensor fittings can be linked when fitting them in corridors and stairwells. Simply ensure that you place the movement sensor options at the entry and exit point, link the standard fittings in a master / slave configuration and when movement is detected at either end all the lights will be activated. This allows additional energy savings without the additional cost involved in having all the lights with sensors.
All the Prodisc fittings are high frequency for flicker free operation and prolonged life.
LYCO DIRECT LTD | Units 10A Clarke Road | Bletchley | Milton Keynes | Buckinghamshire | MK1 1ZR
All content and images are copyright © Lyco Direct Ltd 2015 All rights reserved.
Company No. 2923542 VAT No. GB 650 6449 35 Magento Development By The Pixel