The Myra Straight-Arm Sign Light is attractively finished in anthracite and ruggedly constructed from aluminium, with an IP55 Ingress Protection rating that signifies hardy resistance to either dust or rain.
A stylish means of highlighting exterior signage, the Myra Straight-Arm Sign Light is an effective mode of advertising for hotels, restaurants, and retail stores. For some businesses it may be the difference between attracting passing trade, or not!
The head of the Myra Straight-Arm Sign Light can be rotated 350° and tilted at a maximum 45° angle, so there is plenty of scope to create the effect and coverage you require.
Please note: the Myra Curved Arm Sign Light is a Class 1 fixture that requires connection to electrical earth during installation. To avoid invalidation of the 12-month guarantee carried by SLV/Intalite UK products, it is recommended this light be installed by an NICEIC registered electrical contractor.
The Myra Straight-Arm Sign Light takes a maximum 50W halogen GU10 lamp, which can if you want be substituted for an energy-saving halogen GU10 with a saving of around 20-30% in running costs.
When using halogen bulbs, the Myra Straight-Arm Sign Light should be installed at a minimum height of 2.5 metres.
You can of course install an LED GU10 lamp for even greater savings in running costs.
An LED can equal the output of a 50W halogen GU10 whilst using around 10-12% of the watts. This figure increases to around 20% in a comparison with an energy-saving halogen equivalent, and the incredible long life of LED eliminates maintenance costs, too!
The dimensions of the Myra Straight-Arm Sign Light are:
- Length: 500mm
- Diameter (light head): 80mm
- Back-plate: H 105 x W 80 x D 50mm