The SLV Forchini PD-2 Pendant has an attractive contemporary design, and each product is uniquely handmade. The fibreglass shade has a white exterior and a reflective gold interior that gathers the light and warms its colour before projecting it downwards. A polished chrome ceiling plate, white textile cable and wire suspension cable are supplied with this fitting.
Height adjustable at the point of installation, the Forchini PD-2 Pendant can be suspended to a maximum total height of 1.69 metres (including shade). This is a great choice of luminaire for many types of modern setting, including dining rooms, living rooms or offices. To help you co-ordinate with existing décor, this product is available from Lyco in a choice of sizes and finishes.
As a Safety Class 1 fitting, the Forchini PD-2 Pendant must be connected to electrical earth during installation.
The Forchini PD-2 Pendant takes a 40W maximum GLS bulb (sold separately) with an E27 Edison Screw (ES) cap.
Since incandescent bulbs have been mostly phased out in recent years by EU legislation, Lyco recommend an energy-saving halogen equivalent. This will normally offer a 20-30% energy saving over original incandescent technology and typically lasts twice as long.
Low-energy (CFL) or LED bulbs can also be selected for this fitting, which offer far greater energy savings of around 70-90%, as well as vastly longer lifespans.
A designer Plumen low-energy bulb works well in the Forchini for extra visual appeal, or if you’re looking to create an especially cosy mood, a decorative filament bulb with an extra warm colour temperature makes a good choice.
All SLV/Intalite UK products must be installed by an NICEIC registered electrical contractor. Failure to do so will result in any guarantee becoming void.
The dimensions of the SLV Forchini PD-2 Pendant are:
- Height: 190mm
- Diameter: 380mm
- Cable length: 1500mm