The non-dimmable JCC Fireguard LED3 Downlight is solidly constructed with a die-cast aluminium bezel, and has a smart brushed nickel finish. This superb fitting is a direct replacement for a 35W halogen downlight, offering amazing energy savings and a lifespan long enough to decimate maintenance costs.
Fire-rated and rigorously tested for 30, 60 and 90-minute ceilings, this fitting is compliant with building regulations. The LED3 can be installed below occupied floors, where it will preserve the integrity of the ceiling during a fire and allow critical evacuation time for upstairs occupants.
The IP65 rating of this downlight signifies dust-tight sealing and resistance to jets of water, which makes it suitable for Zone 1 bathroom use. With its modest 85mm depth, this fitting is a good choice for shallow ceiling voids.
This product is available in a choice of finishes from Lyco.
The Fireguard LED3 Downlight comes with a 10-year manufacturer’s guarantee for domestic use, or a 5-year guarantee for commercial use. Online product registration is required in either instance.
The Fireguard LED3 Downlight includes 3 x 1W built-in LEDs and a unique lens design that delivers a smooth spread of light. The LEDs emit 300 lumens of 4000K (CCT) cool white light in a 38° beam. This output of cool light is ideal for task applications in settings like offices or hospitals.
A large heat sink prevents overheating and preserves lifespan in the LEDs and the integrated non-dimmable driver. The heat sink is protected by a closed can to prevent build-up of flammable dust.
Using over 90% less watts than a 35W equivalent, the Fireguard LED3 Downlight also boasts a 30,000 hour lifespan. This is 15 times longer than most halogen light sources, and will virtually eradicate maintenance costs.
The dimensions of the Fireguard LED3 Downlight are:
- Depth: 85mm
- Diameter: 92mm
- Cut-out diameter: 71-73mm (12.5mm 30 min. ceilings) to 80mm (30mm 60-90 min. ceilings)