The Prodisc LED fitting can be as simple or as versatile as you need it to be. It is available as a standard or an emergency fitting and both fittings are also available with a Microwave Movement Sensor option.
Standard Fitting
As you would expect this is simply a LED fitting operated by a standard light switch.
Standard Fitting - Microwave Movement Sensor
This activates when movement is sensed within 10M, 360° detection range and the time on can be adjusted between 6 seconds and 30 minutes.
Emergency Fitting - Standard
The Prodisc can be installed as either maintained or non-maintained, and the choice of 1 or 3 hour emergency lighting mode.
Emergency Fitting – Microwave Movement Sensor
This offers the best of both worlds. The microwave sensor will detect movement and turn the light on for the pre-set time. Should the power fail the emergency lighting will take over for pre-set time.
Link Standard and Microwave Sensor Options
Both the standard and microwave sensor fittings can be linked when fitting them in corridors and stairwells. Simply ensure that you place the movement sensor options at the entry and exit point, link the standard fittings in a master / slave configuration and when movement is detected at either end all the lights will be activated. This allows additional energy savings without the additional cost involved in having all the lights with sensors.
High Frequency
All the Prodisc fittings are high frequency for flicker free operation and prolonged life.